If you have zerks on your classic car, you should know that you’ll need to grease them whenever you complete an oil change. Sometimes they do not want to take the grease, so Brent Ackley recommends using zerk busters. See how helpful these handy helpers can be for classic cars. Zerk Busters can be found at most car stores!
Adjusting and balancing the hood on your classic car can be a tricky part of restoring a classic car. Craig Hopkins understands that, and so he explains how a hood should move and operate and teaches you how to get the perfect fit. He helps you determine if you need to move the hinges upWatch Now >>
Mark Simpson demonstrates how adding and properly maintaining an at-home media blasting cabinet can dramatically improve the quality of your restorations. He shows exactly what steps you need to know to: maintain the consumable parts, selecting blasting media, safety considerations, preparing parts for blasting and how to protect the parts you don’t want blasted.Watch Now >>
The Bead Roller is a handy tool that provides extra strength by adding ridges to your sheet metal. Mark Oja and Cam Benty demonstrate how to use a Bead Roller on your classic car to add a little extra flair and strength to any metal you have.Watch Now >>
Craig Hopkins explains how to sand a car with a paint stick around the edges without making a flat spot. He uses the water blade to distinguish where to sand more and where not to over sand. You will get an up close look on how to properly sand every difficult area, crease, and edge.Watch Now >>